Building Debian system images with vmdb2

# 1 Introduction

vmdb2 builds disk images with Debian installed. The images can be used for virtual machines, or can be written to USB flash memory devices, and hardware computers can be booted off them.

This manual is published as HTML and as PDF.

## 1.1 Installation

You can get vmdb2 by getting the source code from git, either author’s server or gitlab.com.

You can then run it from the source tree:

    $ sudo /path/to/vmdb2/vmdb2 ...

In Debian 10 (“buster”) and its derivatives, you can also install the vmdb2 package:

    $ apt install vmdb2

For any other systems, we have no instructions. If you figure it out, please tell us how.

## 1.2 Why vmdb2 given vmdebootstrap already existed

vmdb2 is a successor of the vmdebootstrap program, written by the same author, to fix a number of architectural problems and limitations with the old program. The new program is not compatible with the old one; that would’ve required keeping the problems, as well.

`vmdebootstrap` was the first attempt by it author to write a tool to build system images. It turned out to not be well designed. Specifically, it was not easily extensible to be as flexible as a tool of this sort should be.

## 1.3 Why vmdb2 given other tools already exist

The author likes to write tools for himself and had some free time. He sometimes prefers to write his own tools rather than spend time and energy evaluating and improving existing tools. He admits this is a character flaw.

Also, he felt ashamed of how messy `vmdebootstrap` turned out to be.

If nobody else likes `vmdb2`, that just means the author had some fun on his own.

# 2 Getting started

You need to make a specification file (in YAML) that tells vmdb2 what kind of image to build, and how. An example:

    steps:
      - mkimg: "{{ output }}"
        size: 4G
      - mklabel: msdos
        device: "{{ output }}"
      - mkpart: primary
        device: "{{ output }}"
        start: 0%
        end: 100%
        tag: /
      - kpartx: "{{ output }}"
      - mkfs: ext4
        partition: /
      - mount: /
      - debootstrap: buster
        mirror: http://deb.debian.org/debian
        target: /
      - apt: install
        packages:
        - linux-image-amd64
        tag: /
      - fstab: /
      - grub: bios
        tag: /

The source repository of vmdb2 has more examples, which are also automatically tested, unlike the above one.

The list of steps builds the kind of image that the user wants. The specification file can easily be shared, and put under version control.

Every action in a step is provided by a plugin to vmdb2. Each action is a well-defined task, which may be parameterised by some of the key/value pairs in the step. For example, `mkimg` would create a raw disk image file. The image is 4 gigabytes in size. `mkpart` creates a partition, and `mkfs` an ext4 filesystem in the partition. And so on.

Steps may need to clean up after themselves. For example, a step that mounts a filesystem will need to unmount it at the end of the image creation. Also, if a later step fails, then the unmount needs to happen as well. This is called a “teardown”.

By providing well-defined steps that the user may combine as they wish, vmdb2 gives great flexibility without much complexity, but at the cost of forcing the user to write a longer specification file than a simple command line invocation.

To use this, save the specification into `test.vmdb`, and run the following command:

    $ sudo vmdb2 test.vmdb --output test.img --verbose

Alternatively the specification can be passed in via stdin by setting the file name to `-`, like so:

    $ cat test.vmdb | sudo vmdb2 - --output test.img --verbose

This will take a long time, mostly at the `debootstrap` step. See below for speeding that up by caching the result.

Due to the kinds of things vmdb2 does (such as mounting, creating device nodes, etc), it needs to be run using root privileges. For the same reason, it probably can’t be run in an unprivileged container.

Running vmdb2 in a container, privileged or not, is not supported. If it works, that is a happy accident. There are no tests to make sure that works, however, and no patches to make vmdb2 work in a container will be considered for merging. This is because vmdb2 is maintained by Lars, who has no use for containers, and does not want the maintenance burden of having code that supports that.

## 2.1 Setting the hostname

vmdb2 uses debootstrap, which copies the host’s /etc/hostname file into the image. You probably want to set the hostname for the image you’re creating. You can do this by overwriting the /etc/hostname file in the image, for example with the following step:

    - chroot: rootfs
      shell: |
        echo myhostname > /etc/hostname

## 2.2 All images must be partitioned

At this time, vmdb2 does not support building partitioned images without partition, or images without a partition table. Such support may be added later. If this would be useful, do tell the authors.

## 2.3 Tags

Instead of device filenames, which vary from run to run, vmdb2 steps refer to block devices inside the image, and their mount points, by symbolic names called tags. Tags are any names that the user likes, and vmdb2 does not assign meaning to them. They’re just strings.

## 2.4 Jinja2 expansion

To refer to the filename specified with the `--output` or `--image` command line options, you can use Jinja2 templating. The variables `output` and `image` can be used.

    - mkimg: "{{ output }}"
    - mklabel: "{{ image }}"

The difference is that `--output` creates a new file, or truncates an existing file, whereas `--images` requires the file to already exist. The former is better for image file, the latter for real block devices.

## 2.5 Speed up image creation by caching

Building an image can take several minutes, and that’s with fast access to a Debian mirror and an SSD. The slowest part is typically running debootstrap, and that always results in the same output, for a given Debian release. This means its easy to cache.

vmdb2 has the two actions `cache-roots` and `unpack-rootfs` and the command line option `--rootfs-tarball` to allow user to cache. The user uses the option to name a file. `cache-rootfs` takes the root filesystem and stores it into the file as a compress tar archive (“tarball”). `unpack-rootfs` unpacks the tarball. This allows vmdb2 to skip running debootstrap needlessly.

The specify which steps should be skipped, the `unless` field can be used: `unpack-rootfs` sets the `rootfs_unpacked` flag if it actually unpacks a tarball, and `unless` allows checking for that flag. If the tarball doesn’t exist, the flag is not set.

    - unpack-rootfs: root

    - debootstrap: buster
      target: root
      unless: rootfs_unpacked

    - cache-rootfs: root
      unless: rootfs_unpacked

If the tarball exists, it is unpacked, and the `debootstrap` and `cache-rootfs` steps are skipped. If the tarball doesn’t exist, the unpack step is silently skipped, and the debootstrap and caching steps are performed instead.

It’s possible to have any number of steps between the unpack and the cache steps. However, note that if you change anything within those steps, or time passes and you want to include the new packages that have made it into Debian, you need to delete the tarball so it is run again.

# 3 Acceptance criteria

This chapter documents the user-level acceptance criteria for vmdb2, and how they are to be verified. It’s meant to be processed with the Subplot tool, but understood by all users of and contributors to the vmdb2 software. The criteria and their verification are expressed as scenarios.

For reasons of speed, security, and reliability, these scenarios test only the core functionality of vmdb2. All the useful steps for actually building images are left out.. Those are tested by actually building images. However, those useful steps are not useful, if the core that invokes them is rotten.

## 3.1 A happy path

The first case we look at is one for the happy path: a specification with two echo steps, and nothing else. It’s very simple, and nothing goes wrong when executing it. In addition to the actual thing to do, each step also defines a “teardown” thing to do. We check that all the steps and teardown steps are performed, in the right order.

Note that the “echo” step is provided by vmdb2 explicitly for this kind of testing, and that the teardown field in the step is implemented by the echo step. It’s not a generic feature.

    given an installed vmdb2
    given file happy.vmdb
    when I run vmdb2 -v happy.vmdb --output=happy.img
    then exit code is 0
    then stdout contains "foo\nbar\nbar_teardown\n"

    steps:
    - echo: foo
      teardown: foo_teardown
    - echo: bar
      teardown: bar_teardown

## 3.2 Checking the version

Requirement: We can ask vmdb2 for its version.

    given an installed vmdb2
    when I run vmdb2 --version
    then exit code is 0
    then stdout matches regex ^\d+\.\d+$

## 3.3 Jinja2 templating in specification file values

vmdb2 allows values in specification files to be processed by the Jinja2 templating engine. This allows users to do thing such as write specifications that use configuration values to determine what happens. For our simple echo/error steps, we will write a rule that outputs the image file name given by the user. A more realistic specification file would instead do thing like create the file.

    given an installed vmdb2
    given file j2.vmdb
    when I run vmdb2 -v j2.vmdb --output=foo.img
    then exit code is 0
    then stdout contains "image is foo.img\nbar"

    steps:
    - echo: "image is {{ output }}"
    - echo: bar

## 3.4 Error handling

Sometimes things do not quite go as they should. Does vmdb2 do things in the right order then? This scenario uses the “error” step provided for testing this kind of thing.

    given an installed vmdb2
    given file unhappy.vmdb
    when I try to run vmdb2 -v unhappy.vmdb --output=unhappy.img
    then exit code is 1
    then stdout contains "foo\nyikes\n"
    then stdout contains "WAT?!\n"
    then stdout contains "foo_teardown\n"
    then stdout doesn't contain "bar_step"
    then stdout contains "bar_teardown"

    steps:
    - echo: foo
      teardown: foo_teardown
    - error: yikes
      teardown: "WAT?!"
    - echo: bar
      teardown: bar_teardown

## 3.5 Step: ansible

Run Ansible using a provided playbook, to configure the image. vmdb2 sets up Ansible so that it treats the image as the host being configured (via the `chroot` connection). The image MUST have Python installed (version 2 or 3 depending on Ansible version).

Step keys:

- `ansible` — REQUIRED; value is the tag of the root filesystem.

- `config_file` — OPTIONAL; value is the filename of an Ansible configuration file, relative to the .vmdb file.

- `group` — OPTIONAL; the name of the Ansible inventory group. Defaults to “image”

- `playbook` — REQUIRED; value is the filename of the Ansible playbook, relative to the .vmdb file.

- `tags` — OPTIONAL; a comma-separated list of Ansible tags to execute

- `extra_vars` — OPTIONAL; a dictionary defining variables to pass to the Ansible playbook.

Example (in the .vmdb file):

    - apt: install
      tag: root
      packages: [python]

    - ansible: root
      playbook: foo.yml
      tags: bar
      config_file: ansible.cfg
      group: AwesomeGroup
      extra_vars:
        iface:
          name: eth0

Example (`foo.yml`):

    - hosts: image
      tasks:

        - name: "set /etc/hostname"
          shell: |
            echo "{{ hostname }}" > /etc/hostname

        - name: "unset root password"
          shell: |
            sed -i '/^root:[^:]*:/s//root::/' /etc/passwd

        - name: "configure networking"
          copy:
            content: |
              auto {{ iface.name }}
              iface {{ iface.name }} inet dhcp
              iface {{ iface.name }} inet6 auto
            dest: /etc/network/interfaces.d/wired

      vars:
        hostname: discworld

## 3.6 Step: apt

Install packages using apt, which needs to already have been installed.

Step keys:

- `apt` — REQUIRED; value MUST be `install`.

- `tag` — REQUIRED; value is the tag for the root filesystem.

- `packages` — REQUIRED; value is a list of packages to install.

- `recommends` — OPTIONAL; defaults to true. Setting value to a false (i.e. `0`, `null`, `false`) asks apt-get to run with the `--no-install-recommends` option set.

Example (in the .vmdb file):

    - apt: install
      tag: root
      packages:
      - python
      - linux-image-amd64

## 3.7 Step: cache-rootfs

Create a tarball of the root filesystem in the image.

Step keys:

- `cache-rootfs` — REQUIRED; tag of root filesystem on image.
- `force` — OPTIONAL; boolean that enables overwriting of an existing rootfs tarball by `vmdb2`, allowing the tarball to be used as both a build input and a build output. This can be useful in multi-stage build chains where a “common base OS” rootfs filesystem is populated and packaged as a rootfs tarball by `vmdb2`, and this tarball is consumed by multiple downstream `vmdb2` builds that extract the tarball into disk images that have different partition layouts and/or filesystems.

Example (in the .vmdb file):

    # typical use
    - cache-rootfs: root
      unless: rootfs_unpacked

    # create a rootfs tarball output at the end of a build process
    - cache-rootfs: root
      force: true

## 3.8 Step: chroot

Run a shell snippet in a chroot inside the image.

Step keys:

- `chroot` — REQUIRED; value is the tag for the root filesystem.

- `shell` — REQUIRED; the shell snippet to run

Example (in the .vmdb file):

    - chroot: root
      shell: |
          echo I am in chroot

## 3.9 Step: copy-dir

Recursively copy a directory from outside into the target filesystem.

Step keys:

- `copy-dir` — REQUIRED; the full (starting from the new filesystem root) path of directory to copy to. Any missing directories will be created with the configured user and group ownership and permissions. See the `perm`, `uid`, `gid`, `user` and `group` keys.
- `src` — REQUIRED; the path of the directory to copy from on the host filesystem, outside the chroot, relative to the current working directory of the vmdb2 process.
- `perm` — OPTIONAL; the permissions to apply to any missing parent directories that are created on the target. The value of `umask` is applied to this value.
- `umask` — OPTIONAL; the numeric (octal) representation of umask to apply to the permissions of copied files and directories. Defaults to 0022.
- `uid` — OPTIONAL; the numeric user ID to assign to the copied files and directories. Defaults to 0 (root).
- `gid` — OPTIONAL; the numeric group ID to assign to the copied files and directories. Defaults to 0 (root).

## 3.10 Step: copy-file

Copy a file from outside into the target filesystem.

Step keys:

- `copy-file` — REQUIRED; the full (starting from the new filesystem root) path name of the file to create. Any missing directories will be created (owner root, group root, mode 0511).
- `src` — REQUIRED; filename on the host filesystem, outside the chroot, relative to the current working directory of the vmdb2 process.
- `perm` — OPTIONAL; the numeric (octal) representation of the file’s permissions. Defaults to 0644.
- `uid` — OPTIONAL; the numeric user ID of the file’s owner. Defaults to 0 (root).
- `gid` — OPTIONAL; the numeric user ID of the file’s group. Defaults to 0 (root).

## 3.11 Step: create-dir

Create a directory in the target filesystem

Step keys:

- `create-dir` — REQUIRED; the full (starting from the new filesystem root) path name of the directory to create. It will work as a `mkdir -p` — Any intermediate directories that do not yet exist will be created.
- `perm` — OPTIONAL; the numeric (octal) representation of the directory’s permissions. Defaults to 0755.
- `uid` — OPTIONAL; the numeric user ID of the directory’s owner. Defaults to 0 (root).
- `gid` — OPTIONAL; the numeric user ID of the directory’s group. Defaults to 0 (root).

## 3.12 Step: create-file

Create an empty file in the target filesystem.

Step keys:

- `create-file` — REQUIRED; the full (starting from the new filesystem root) path name of the file to create. It will not create any directories; if they need to be created, please use `create-dir` first.
- `contents` — REQUIRED; the contents to be written to the generated file.
- `perm` — OPTIONAL; the numeric (octal) representation of the file’s permissions. Defaults to 0644.
- `uid` — OPTIONAL; the numeric user ID of the file’s owner. Defaults to 0 (root).
- `gid` — OPTIONAL; the numeric user ID of the file’s group. Defaults to 0 (root).

## 3.13 Step: cryptsetup

Set up disk encryption using LUKS with the `cryptsetup` utility. The encryption passphrase is read from a file or from the output of a command. The encrypted disk gets opened and can be mounted using a separate tag for the cleartext view.

Step keys:

- `cryptsetup` — REQUIRED; the tag for the encrypted block device. This is not directly useable by users, or mountable.

- `name` — REQUIRED; the tag for the de-crypted block device. This is what gets mounted and visible to users.

- `password` — OPTIONAL; the encryption password

- `key-file` — OPTIONAL; file from where passphrase is read.

- `key-cmd` — OPTIONAL; command to run, passphrase is the first line of its standard output.

One of `password`, `key-file`, or `key-cmd` is REQUIRED.

Example (in the .vmdb file):

    - cryptsetup: cleartext_pv0
      password: hunter2
      name: pv0

## 3.14 Step: debootstrap

Create a directory tree with a basic Debian installation. This does not include a boot loader.

Step keys:

- `debootstrap` — REQUIRED; value is the codename of the Debian release to install: `stretch`, `buster`, etc.

- `target` — REQUIRED; value is the tag for the root filesystem.

- `mirror` — REQUIRED; which Debian mirror to use

- `keyring` — OPTIONAL; which gpg keyring to use to verify the packages. This is useful when using a non-official Debian repository (e.g. Raspbian) as by default debootstrap will use the keys provided by the “debian-archive-keyring” package.

- `install_keyring` — OPTIONAL; if set to `yes`, the gpg keyring specified by the `keyring` key will be installed in the image for use when installing packages from non-official Debian repositories.

- `arch` — OPTIONAL; the foreign architecture to use.

- `variant` — OPTIONAL; the variant for debootstrap.

- `include` — OPTIONAL; a list of additional packages for debootstrap to install.

- `tls_ca_certs` — OPTIONAL; a list of paths to TLS Certificate Authority (CA) cert files to install in the image after the debootstrap process has completed. This allows the use of package repositories with HTTPS transports that use TLS certificates issued by private CAs. Note that the CA cert files being installed must have a `.crt` suffix in order to be used.

Example (in the .vmdb file):

    - debootstrap: buster
      target: root
      mirror: http://mirror.example.com/debian
      keyring: /etc/apt/trusted.gpg

## 3.15 Step: fstab

Create `/etc/fstab` inside the the image.

Step keys:

- `fstab` — REQUIRED; value is the tag for the root filesystem.

Example (in the .vmdb file):

    - fstab: root

## 3.16 Step: grub

Install the GRUB bootloader to the image. Works on a PC for traditional BIOS booting, PC and ARM machines for modern UEFI booting, and PowerPC machines for IEEE1275 booting. Supports Secure Boot for amd64 UEFI.

Warning: This is the least robust part of vmdb2.

Step keys:

- `grub` — REQUIRED; value MUST be one of `uefi` and `bios`, for a UEFI or a BIOS boot, respectively. Only PC systems support the `bios` option.

- `tag` — REQUIRED; value is the tag for the root filesystem.

- `efi` — REQUIRED for UEFI; value is the tag for the EFI partition.

- `prep` — REQUIRED for IEEE1275; value is the tag for the PReP partition.

- `console` — OPTIONAL; set to `serial` to configure the image to use a serial console.

- `image-dev` — OPTIONAL; which device to install GRUB onto; this is needed when installing to a real hard drive, instead of an image.

- `quiet` — OPTIONAL; should the kernel be configured to boot quietly? Default is no.

- `timeout` — OPTIONAL; set the grub menu timeout, in seconds. Defaults to 0 seconds.

- `kernel-params` — OPTIONAL; list of parameters which grub will pass to the Linux kernel. Default is: `["biosdevname=0", "net.ifnames=0", "consoleblank=0", "rw"]`

Example (in the .vmdb file):

    - grub: bios
      tag: root

Same, but for UEFI, assuming that a FAT32 filesystem exists on the partition with tag `efi`:

    - grub: uefi
      tag: root
      efi: efi
      console: serial

Or for IEEE1275, assuming that a partition with tag `prep` exists:

    - grub: ieee1275
      tag: root
      prep: prep
      console: serial

Install to a real hard disk (named with the `--image` option):

    - grub: uefi
      tag: root
      efi: efi
      image-dev: "{{ image }}"

## 3.17 Step: kpartx

Create loop devices for partitions in an image file. Not needed when installing to a real block device, instead of an image file.

Step keys:

- `kpartx` — REQUIRED; filename of block device with partitions.

- `tags` — OPTIONAL; list of tags to apply to partitions when re-using an existing image that has already been populated with formatted partitions. This can be useful in scenarios where an appliance disk image is being built: There needs to be a “debug” version of the appliance that provides direct SSH access, the use of `sudo`, etc., and also a “production” version that does not. Otherwise the disk images need to be identical to aid in diagnosing issues found in production environments. The production and debug images can be produced by first creating the “release” version using `vmdb2`, and then passing the production disk image to a second `vmdb` where developer access is configured.

Example (in the .vmdb file):

    # typical use
    - kpartx: "{{ output }}"

    # using an image that already contains partitions containing filesystems
    # that should be mounted as `/boot` and `/`
    - kpartx: "{{ output }}"
      tags:
        - boot
        - root

## 3.18 Step: lvcreate

Create an LVM2 logical volume (LV) in an existing volume group.

Step keys:

- `lvcreate` — REQUIRED; value is the tag for the volume group.

- `name` — REQUIRED; tag for the new LV block device.

- `size` — REQUIRED; size of the new LV. The special value `fill` will make the volume use all of the available space.

Example (in the .vmdb file):

    - lvcreate: rootvg
      name: rootfs
      size: 1G

## 3.19 Step: lvscan

Scans for existing LVM2 logical volumes (LVs) within a named volume group. This is useful when using an existing image as input which has been pre-populated with LVM logical volumes, allowing the volumes to be mounted. Please see the kpartx plugin documentation for further details on passing an existing image to `vmdb2`. This plugin adds LVM support to that use-case.

Step keys:

- `lvscan` — REQUIRED; value is the name of the volume group containing the logical volumes.

- `tags` — REQUIRED; list of tags to apply to the discovered logical volumes. The tags must match names of volumes in the volume group. Volumes in the image which do not need to be mounted can be omitted from the tags list

Example (in the .vmdb file):

    - lvscan: the_volume_group
      tags:
        - lv_one
        - lv_two

## 3.20 Step: mkfs

Create a filesystem.

Step keys:

- `mkfs` — REQUIRED; filesystem type, such as `ext4` or `vfat`.

- `partition` — REQUIRED; tag for the block device to use.

- `options` — OPTIONAL; aditional options for mkfs.

Example (in the .vmdb file):

    - mkfs: ext4
      partition: root
      options: -O ^64bit,^metadata_csum

## 3.21 Step: mkimg

Create a new image file of a desired size.

Step keys:

- `mkimage` — REQUIRED; name of file to create.

- `size` — REQUIRED; size of the image.

Example (in the .vmdb file):

    - mkimg: "{{ output }}"
      size: 4G

## 3.22 Step: mklabel

Create a partition table on a block device.

Step keys:

- `mklabel` — REQUIRED; type of partition table, MUST be one of `msdos` and `gpt`.

- `device` — REQUIRED; tag for the block device.

Example (in the .vmdb file):

    - mklabel: msdos
      device: "{{ output }}"

## 3.23 Step: mkpart

Create a partition.

Step keys:

- `mkpart` — REQUIRED; type of partition to create: use `primary` (but any value acceped by `parted` is OK).

- `device` — REQUIRED; filename of block device where to create partition.

- `start` — REQUIRED; where does the partition start?

- `end` — REQUIRED; where does the partition end?

- `tag` — REQUIRED; tag for the new partition.

Example (in the .vmdb file):

    - mkpart: primary
      device: "{{ output }}"
      start: 0%
      end: 100%
      tag: root

## 3.24 Step: mount

Mount a filesystem.

Step keys:

- `mount` — REQUIRED; tag of filesystem to mount.

- `dirname` — OPTIONAL; the mount point.

- `mount-on` — OPTIONAL; tag of already mounted filesystem in image. (FIXME: this may be wrong?)

- `zerofree` — OPTIONAL; Boolean flag controlling whether or not to run the `zerofree` utility on the filesystem after unmounting it at the end of the build process. Defaults to `true`

- `keep_resolvconf` — OPTIONAL; Boolean flag controlling whether or not to remove the file `/etc/resolv.conf` before unmounting it at the end of the build process. Defaults to `false`

Example (in the .vmdb file):

    - mount: root

## 3.25 Step: resize-rootfs

Configure the system on the image so that it automatically resizes itself to fill the actual disk, upon first boot. For this to work, the root file system MUST be the last partition on the image.

Also, the image MUST have the `parted` package installed for the `partprobe` command.

Step keys:

- `resize-rootfs` — REQUIRED; value MUST be the tag for the root filesystem.

This is based on reading the changes by Peter Lawler to the image-specs repository to do the same thing.

Example:

    - resize-rootfs: root

## 3.26 Step: set_part_flag

Set or clear a flag in a partition.

Step keys:

- `set_part_flag` — REQUIRED; filename of block device containing partition that will have the flag set or cleared.

- `tag` — REQUIRED; tag of the partition being modified.

- `flag` — REQUIRED; the name of the flag to be set or cleared

- `state` — OPTIONAL; the flag state: “enabled” or “disabled”. Defaults to “enabled”.

Example (in the .vmdb file):

    - set_part_flag: "{{ output }}"
      tag: rootfs
      flag: bios_grub
      state: enabled

## 3.27 Step: shell

Run a shell snippet on the host. This is not run in a chroot, and can access the host system.

Step keys:

- `root-fs` — REQUIRED; value is the tag for the root filesystem.

- `shell` — REQUIRED; the shell snippet to run

Example (in the .vmdb file):

    - root-fs: root
      shell: |
          echo I am in NOT in chroot.

## 3.28 Step: unpack-rootfs

Unpack a tarball of the root filesystem to the image, and set the `rootfs_unpacked` condition to true. If the tarball doesn’t exist, do nothing and leave the `rootfs_unpacked` condition to false.

Step keys:

- `unpack-rootfs` — REQUIRED; tag for the root filesystem.

Example (in the .vmdb file):

    - unpack-rootfs: root

## 3.29 Step: vgcreate

Create an LVM2 volume group (VG), and also initialise the physical volumes for it.

Step keys:

- `vgcreate` — REQUIRED; value is the tag for the volume group. This gets initialised with `vgcreate`.

- `physical` — REQUIRED; list of tags for block devices (partitions) to use as physical volumes. These get initialised with `pvcreate`.

Example (in the .vmdb file):

    - vgcreate: rootvg
      physical:
      - my_partition
      - other_partition

## 3.30 Step: virtual-filesystems

Mount the usual Linux virtual filesystems in the chroot:

- `/proc`
- `/dev`
- `/dev/pts`
- `/dev/shm`
- `/run`
- `/run/lock`
- `/sys`

They will be automatically unmounted at the end.

Often, the virtual filesystems are unnecessary, but some Debian packages won’t install without them. The grub boot loader needs them as well, but mounts what it needs itself, if necessary.

Step keys:

- `virtual-filesystems` — REQUIRED; value is the tag of the root filesystem.

Example (in the .vmdb file):

    - virtual-filesystems: rootfs